Comparative Study of Microleakage of Nanocomposite Resin Restoration Using Filled and Unfilled Adhesives
The purpose of this study was to evaluate the microleakage of nanofilled resin composite restorations when three adhesives that are filled adhesives : Adper® Single Bond 2 and OptiBond® Solo Plus and unfilled adhesive : Adper® Single Bond of Two-step Total-etch System were used. Sixty Class V cavities (3 mm. width, 4 mm. length and 2 mm. depth) were prepared on buccal surface of extracted human molars. Occlusal margins were located in enamel whereas gingival margins were located in dentin or cementum. Prepared cavities were divided into 3 groups of 20 cavities and restored with a nanofilled resin composite Filtex® Z 350 with one unfilled adhesive (Adper® Single Bond) and two filled adhesives (Adper® Single Bond 2 and OptiBond® Solo Plus). The adhesives were used according to the manufacturers’ instructions. The teeth were stored in distilled water for 24 hours before subjected to thermocycling between 5-55°c for 500 cycles with dwell time of 20 seconds and then immersed in 2% methylene blue dye for 4 hours. Each tooth was longitudinally sectioned in bucco-lingual direction. The sectioned specimens were examined under Stereomicroscope at 35X magnification and recorded with Digital camera. The distance of dye penetration were measured using Image J program. The data were analyzed by One-way ANOVA test (p<0.05). The results indicated that there was no significant difference in microleakage among three filled adhesives at occlusal margin as well as gingival margin. Microleakage was significantly less at occlusal margin than gingival margin (p<0.05) for all groups.
1. เฉลิมพล ลี้วิโรจน์ และ มนตรี จันทรมังกร. การบูรณะฟันหลังด้วยวัสดุสีเหมือนฟัน. ซันต้าการพิมพ์ กรุงเทพฯ 2549: 168-184.
2. Kidd EAM. Microleakage: a review. J Dent 1976; 4:199-205.
3. Going RE. Microleakage around dental restorations: a summarizing review. J Am Dent Assoc 1972; 84:1349-1357.
4. Brännström M. Communication between The oral cavity and the dental pulp associated with restorative treatment. Oper Dent 1984; 9:57-68.
5. Kemp-Scholte CM, Davidson CL. Complete marginal seal of class V resin composite restorations effected by increased flexibility. J Dent Res 1990;69:1240-1243.
6. Van Meerbeek B, Willems G, Celis JP, Roos JR, Bream M, Lambrechts P, et al. Assessment by nano-identation of the hardness and elasticity of the resin-dentin bonding area. J Dent Res 1993;72:1434-1442.
7. Swift Jr EJ, Triolo Jr P, Barkmeier WW, Bird JL, Bounds SJ. Effect of low viscosity resin on the performance of dental adhesives. Am J Dent 1996;9:100-104.
8. Labella R, Lambrechts P, Van Meerbeek B, Vanherle G. Polymerization shrinkage and elasticity of flowable composite and filled adhesives. Dent Mater 1999;15:128-137.
9. Tay FR, Moulding KM, Pashley DH. Distribution of nanofillers from a simplifiedstep adhesive in acid-conditioned dentine. J Adhes Dent 1999;1:103-117.
10. Choi KK, Condon JR, Ferracane JL. The effects of adhesive thickness on polymerization contractrion stress of composite. J Dent Res 2000;79:812-817.
11. Deliperi S, Bardwell DN, Papathanasiou A, Perry R. Microleakage of resin based liner materials and condensable composites using filled and unfilled adhesives. Am J Dent 2003;16:351-355.
12. Montes MAJR, Goes MF, Cunha MRB, Soares AB. A morphological and tensile bond strength evaluation of an unfilled adhesive with lowviscosity composites and a filled adhesive in one and two coats. J Dent 2001; 29:435-441.
13. Unterbrink GL, Liebenberg WH. Flowable resin composites as filled adhesives literature review and clinical recommendations. Quintessence Int 1999;30:249-257.
14. Bagley AL, Wakefield CW, Robbins JW. In vitro comparison of filled and unfilled universal bonding agents of amalgam to dentin. Oper Dent 1994;19:97-101.
15. Boghosian A. Clinical evaluation of a filled adhesive system in class 5 restorations. Compendium 1996;17:750-757.
16. Miyazaki M, Ando S, Hinoura K, Onose H, Moore BK. Influence of filler to bonding agents on shear bond strength to bovine dentin. Dent Mater 1995;11:234-238.
17. Pradelle-Plasse N, Nedchad S, Tavernier B, Colo P. Effect of dentin adhesives on the enamel-dentin/composite interfacial microleakage. Am J Dent 2001;14:344-348.
18. Schmitt DC, Lee J. Microleakage of adhesive resin systems in the primary and permanent dentition. Pediatr Dent 2002;24:587-593.
19. ดนุชิษณ์ พนมยงค์, นาฎยา วงษ์ปาน, ชลธชา ห้านิรัติศัย, พิศลย์ เสนาวงษ์. การรั่วซึมตามขอบโพรงฟันคลาสไฟฟ์ที่บูรณะด้วยเรซินคอมโพสิตโดยใช้วิธีอุดที่แตกต่างกัน. ว ทันต 2548; 55: 45-51.
20. Silvera de AC, Incerti da ST, Ogliari FA. Meirelee SS, Piva E, Demarco FF. Microleakage of seven adhesive systems in enamel and dentin. J Comtemp Dent Pract 2006; 7:26-33.
21. Marshall Jr. GW, Marshall SJ, Kinney JH, Balooch M. The dentin substrate: structure and properties related to bonding. J Dent 1997; 25:441-458.
22. ปัทมา ชัยเลิศวณิชกุล, สุวิทย์ วิมลจิตต์, ชาญคริต สาธร. การเปรียบเทียบการรั่วซึมตามขอบของโพรงฟันคลาสทูเมื่อบูรณะด้วยคอมโพสิตเรซินชนิดกดแน่นได้และชนิดไฮบริด. ว ทันตขอนแก่น 2545; 5: 98-103.
23. Swift Jr EJ, Perdigao J, Heymann HO. Bonding to enamel and dentin : a brief history and state of the art. Quintessence Int 1995; 26:95-110.
24. Manhart J, Chen HY, Mehl A, Weber K, Hickel R. Marginal quality and microleakage of adhesive class V restoration. J Dent 2001; 29:123-130.
25. Tay FR, Pashley DH, Yiu C, Cheong C, Hashimoto M, Itou K, Yoshiyama M, King NM. Nanoleakage types and potential implications: Evidence from unfilled and filled adhesives with the same resin composition. Am J Dent 2004;17:182-190.
26. Adper™ SingleBondPlus adhesive [homepage on the Internet]. 3MESPE. Available from: http://www.3MESPE.com/.
27. Swift Jr EJ, Perdigao J, Heymann HO, Wilder Jr AD, Bayne SC, May Jr KN, Sturdevant JR, Roberson™. Eighteen-month clinical evaluation of a filled and unfilled dentin adhesive. J Dent 2001;29:1-6.
28. Braga RR, Cesar PF, Gonzaga CC. Tensile bond strength of filled and unfilled adhesives to dentin. Am J Dent 2000;13:93-97.
29. Lee YK, Pinzon LM, OíKeefe KL, Powers JM.
Effect of filler addition on the bonding
parameters of dentin bonding adhesives
bonded to human dentin. Am J Dent 2006;19:
93-97.